Varco TDS-9SA Top Drive [AE]

Equipment Name: Varco Top Drive (Used)
Equipment Location: India

Varco TDS-9SA Top Drive Specification

Brand: Varco
Model: TDS 9SA
Hoisting capacity: 400 ton

Varco TDS-9SA Top Drive Advantages

• Varco TDS-9SA Top Drive is the first top drive to use twin motors, this 2 × 350 hp unit prepared the path for the success of the TDS-10SA.
• It is equipped with a valve to dial, remote control operated, which decreases the loss and leakage of drilling mud when the reviews coming out or is disconnected after driving over the rig floor.
• In the well control operations, with the top drive shaft increases security by reducing wear on the blowout preventer (BOP) to allow the seal around a round tube rather than around a quadrant or hexagonal kelly. We can connect to the drill pipe at any level of the tower to circulate the drilling fluids.
• Varco TDS-9SA Top Drive reduces the time for those functions that are not drilling. Most of the time remains drilling. Less time on the connections, taking directional records, travel, reviewing, etc.
• Minimize risk and total drilling costs by minimizing the problems of differential sticking Grips and packaging. The cost of downhole tools that may be lost in the well are high.
• Varco TDS-9SA Top Drive is a more secure and easier to implement, simultaneously, torsion and tension that is required in point operations free and loosened the string.
• Allows rotation and movement immediately when problems are found in the hole.
• The lift can be operated hydraulically to move toward the staple, and so we can maneuver the drill pipe and Drill Collars safely, this reduces the risks in handling the pipe.
• Applies the back reaming without limitations. This maneuver with kelly and wedges present a hazard to personnel maneuvering tools.
• If wellbore stability allows, we can make connections in the background during directional drilling, eliminating the need to re-orient the directional tool face after each new connection.

The Oilfield Equipment related post Varco TDS-9SA Top Drive [AE] is from Flowtech Energy. Looking for Oilfield Equipment including New, Used, Remanufactured and Surplus Oilfield Supply, check out our inventory or call our toll free number at 877-645-6693 for more information.

Varco TDS-9SA Top Drive [AE] posted first on https://flowtechenergy.wordpress.com

Caterpillar 3516 Marine Propulsion Engine [AM]

Equipment Name: Caterpillar 3516 Marine Propulsion Engine
Equipment Location: India

Caterpillar 3516 Marine Propulsion Engine Information

• Manufacturer: Caterpillar
• Model Number: Cat 3516
• Serial Number: S2X01133/30
• Power Rating: 1920 KW @ 1600 RPM

Caterpillar 3516 Marine Propulsion Engine Benefits

Caterpillar 3516 Marine Propulsion Engine provides extensive power, propulsion and asset intelligence solutions for the worldwide marine industry in high and medium speed applications. The Cat 3516 Marine Engine Series Provides Lower Emissions with More Power.

Long-term durability, high fuel efficiency, simplified service, and long-life-to-overhaul – Caterpillar 3516 Marine Propulsion Engine provide maximum productivity with minimum outlay.

Engine uptime is critical for you, your crew, your customers and your main concern. That’s why Cat and MaK propulsion engines power your vessel to any port. The industry’s largest range of engines provide the reliability you require. Caterpillar Marine Power Systems guarantee that you have an engine on board that will work as hard as you do.

A Rating (unrestricted continuous)

For vessels operating at 100% rated load and appraised speed without interruption or load cycling.
Normal applications include tugboats, freighters and bottom trawlers.

Heavy Duty B ratings

For vessels working at up to 80% rated load and rated speed with some load cycling (40% to 80% load factor).
Basic applications may include mid-water trawlers, crew boats, ferries, towboats and supply boats. Typical operation ranges from 3000 to 5000 hours each year.

Intermittent Duty D Ratings

For vessels working at rated load and rated speed up to 16% of the time (up to 50% load factor).
Normal applications include offshore patrol boats, police boats, some fishing vessels, fire boats, or harbor tugboats. Regular activity ranges from 1000 to 3000 hours per year.

The Oilfield Equipment related post Caterpillar 3516 Marine Propulsion Engine [AM] is from Flowtech Energy. Looking for Oilfield Equipment including New, Used, Remanufactured and Surplus Oilfield Supply, check out our inventory or call our toll free number at 877-645-6693 for more information.

Caterpillar 3516 Marine Propulsion Engine [AM] posted first on https://flowtechenergy.wordpress.com

Tesco ECI 650T Top Drive Used [AE]

Equipment Name: Tesco ECI 650T Top Drive (Used)
Equipment Location: India

Tesco ECI 650T Top Drive Specification

Brand: Tesco
Model: ECI 650T
Serial Number: 303
Load Capacity: 650 Tons
Motor Power: 900 HP (Dual 450 HP DC motors)
Max Drilling Torque: 36,700 ft/lbs
Make-up Torque: 45,000 ft/lbs
Breakout Torque: 56,000 ft/lbs
Max Speed: 193 rpm

Tesco ECI 650T Top Drive – Electric Top Drive

Compact top drive that fits into any triple masts. Rated at either 500 or 650 tons and powered by two 450 hp AC motors.

Tesco 650T top drive is modular, high performance electric top drives built for demanding drilling applications and are compact enough to fit into any triple mast. In the ECI(S) 900, traditional induction motors have been replaced with two liquid-cooled, magnet-synchronous motors which are capable of delivering up to 450HP each.

Tesco’s electric top drive systems utilize late-generation alternating current technology and use a permanent magnet motor and a computerized control system. This non-sparking, lightweight, Tesco ECI 650T electric top drive represents a significant technological advancement over more conventional electric top drives.

The complete system including the top drive, torque system and power unit can be installed within one day, typically with no rig modifications necessary. A double ball mud saver is also incorporated into the framework’s structure.

The Tesco ECI 650T top drive’s unique design integrates the gearbox and pipe handling spool resulting in a very compact unit. It also incorporates a programmable logic control which improves communications between the drive system and the driller’s panel, optimizes efficiency and provides important safety interlocks.

Tesco ECI 650T Top Drive Features

• Permanent Magnet Motor Technology
• Ideal For Heli-Transport Solutions
• Lightest Weight In 500/650T Class
• Compatible With Existing Swivel
• Dolly System Integrations
• New eDrive Maximizes Operating Performance
• 1350 HP Option
• Offshore Capable

Tesco ECI 650T Top Drive Advantages

• low maintenance
• improved performance efficiency
• higher torque capacity
• more environmentally friendly
• Quickly and easily, use the same top drive on multiple drilling rigs

Electric top drives use the power of the existing rig generator to perform the necessary tasks required for drilling applications.

The Oilfield Equipment related post Tesco ECI 650T Top Drive Used [AE] is from Flowtech Energy. Looking for Oilfield Equipment including New, Used, Remanufactured and Surplus Oilfield Supply, check out our inventory or call our toll free number at 877-645-6693 for more information.

Tesco ECI 650T Top Drive Used [AE] posted first on https://flowtechenergy.wordpress.com

Skytop Brewster N-95 1500 HP Drilling Rig

Equipment Name: Skytop Brewster N-95 1500 HP Drilling Rig (Training Rig Like New)
Manufacturer: Skytop Brewster
Size: 1500 HP
Manufacture Date: 2014

Skytop Brewster N-95 1500 HP Drilling Rig Description:

Skytop Brewster N-95 1500 HP Drilling Training Rig is in Excellent Condition and look like new.

SKYTOP-BREWSTER N-95 1500HP S/D Drawworks p/b (2) 1000HP Traction Motors
DRILLMEC 152’H 1,000,000#SHL Cantilever Mast
DRILLMEC 25’H Box-On-Box Substructure
McKISSICK 350-Ton Block/Hook Combo
SKYTOP-BREWSTER SZX 400-Ton Swivel
SENTRY 27-1/2” Rotary Table
(2) OILWELL LPT17 1700HP Triplex Pumps EA p/b 1000HP Traction Motor
1000-Bbl 2-Tank Mud System w/Solids Control Equip, Mixing Tank
SHAFFER 11” 5000# Annular & Double BOPs
Asst’d Handling Tools & Auxiliary Equipment

Skytop Brewster N-95 1500 HP Drilling Rig Detailed Inventory:

SKYTOP-BREWSTER N-95 1500HP Drawworks, LEBUS Grooved f/1-1/2” Line, PARKERSBURG PC56090-R 60” Brake, Air Driller Console, (2) Catheads, p/b (2) GE 1000 HP Traction Motors

DRILLMEC 152’H 1,000,000#SHL Cantilever Mast w/7-Sheave Crown Block, 4” Standpipe,Racking Board, Ladder, Fall Arrest Device, Rig Lights

DRILLMEC 25’H x 52’L Split Level Box-Type Substructure w/Deadline Anchor, (2) Air Receiver Tanks, (2) I. RAND FA5A-LXK1/ FA5A-05025C Air Hoists, (1) I. RAND FFA50K Air Hoist, Rig Lights, Stairs, Handrails, V-Door Ramp, Catwalk, Brake Water System, Brake Water Tank

McKISSICK 350-Ton Block/Hook Combo w/(5) 48” Sheaves, Grooved f/1-1/2” Line, Set of 4” x 96”L 350-Ton Elevator Links, WEB WILSON 250-Ton 5-1/2” CL Elevator

SKYTOP-BREWSTER SZX 400-Ton Swivel w/Kelly Spinner, BAASH ROSS JOY 1TP6 Square Kelly Bushing

SENTRY 27-1/2” x 53-1/4” Rotary Table w/Split Master Bushing

(2) OILWELL LPT17 1700HP Triplex Mud Pumps EA w/Forged Steel Fluid End & Quick Change Caps, HYDRIL Pulsation Dampener, OTECO 3” Relief Valve, EA p/b (2) 1000HP Traction Motors, Skidded

(2) 1000-Bbl Mud Tanks w/(5) 10HP Mud Agitators, MI SWACO Mongoose Pro Linear Motion Shale Shaker, MI SWACO MD-2 Linear Motion Shale Shaker, Mud Hopper, (2) Wash Vats, (1) Acid Vat

ATCO 10’W x 21’L Toolpusher’s House/Office w/Built-In Desk, Executive Chairs, File Cabinet, Refrigerator, Microwave, Shower & Restroom, Storage Room, Central Air, Skidded

SHAFFER 11” 5000# Double Blowout Preventer with (4) 4” Outlets, Flanged Top & Bottom

SHAFFER 11” 5000# Annular Blowout Preventer with Flanged Top & Bottom

Approx 3,000′ of 1-1/2” Drill Line on Air Powered Drill Line Spooler with Stand

Handling Tools & Auxiliary Equipment Including: OILWELL 3” to 5-1/2” Hyd Pipe Spinner • HT-55 Rotary Tongs • VARCO 5” SDXL Slips • (2) VARCO 11-Seg DCS Slips •(4) Sets Type-C Safety Clamps • Type E Weight Indicator • (2) Bug Blowers p/b 5 HP Elec Motors

Top Drive: 2010 Canrig Top Drive 500 Ton

The Oilfield Equipment related post Skytop Brewster N-95 1500 HP Drilling Rig is from Flowtech Energy. Looking for Oilfield Equipment including New, Used, Remanufactured and Surplus Oilfield Supply, check out our inventory or call our toll free number at 877-645-6693 for more information.

Skytop Brewster N-95 1500 HP Drilling Rig posted first on https://flowtechenergy.wordpress.com

MTU 12V 4000 Marine Generator Used [RM]

Equipment Name: MTU 12V 4000 Marine Generator (Used)
Engine Model: 12V 4000 M23F
Equipment Location: India
Manufacturer:  MTU

MTU 12V 4000 Marine Generator Specification:

KVA: 1338
Hz: 50
RPM: 1500
Manufacture Year: 2013

MTU 12V 4000 Marine Generator Description

MTU gensets up to 2,880 kWe for commercial applications, as auxiliary and diesel electric propulsion. High flexibility to adapt customer specific requirements. MTU Marine gensets are made specifically for the challenges of harsh marine environments and are manufactured in ISO 9001 certified facilities. All components work together seamlessly.

Whether cost-efficient systematized gensets or highend customized solutions: What you get is a complete propulsion solution from a single trusted source in proven MTU quality. MTU 12V 4000 Marine Generator Diesel Engines for Onboard Power Generation and Diesel-Electric Drives, continuous duty in unrestricted continuous operation.

MTU Onsite Energy diesel generator sets provide reliable solutions for your power generation needs. Featuring long service intervals, low fuel consumption and low emissions backed by more than 60 years of experience, our generator sets are designed to perform.

 MTU 12V 4000 Marine Generator Benefits:

• MTU 12V 4000 Marine Generator proven quality and reliability, from cost-efficient standardized gensets to high-end customized solutions
• Global component sourcing and worldwide manufacturing potential (for example, Brazil) to fulfill local content requirements
• High availability and long TBO of up to 42,000 hours for maximum efficiency
• Very easy installation in the engine room thanks to the compact genset design and mounting on a rugged and robust base frame

MTU 12V 4000 Marine Generator – Diesel Engines Features:

MTU 12V 4000 Marine Generator diesel engines perform reliably and efficiently as main or ancillary drive systems and provide energy as on-board power supply systems. Their performance, power and reliability has been proven time and time again. Their longevity is unmatched. Naturally, all MTU engines comply with the requirements of all relevant classification societies. This latest generation of MTU Series 4000 diesel engines delivers high operational availability and is engineered for maximum reliability.

High performance with low weight
The engines of the Series 4000 are distinguished above all by their outstanding power to weight ratio and high power density. As a result they provide the necessary power reserves in order to drive heavy vehicles, boats or generators – without taking up a lot of unnecessary installation space.

Emission optimized for every deployment location
MTU 12V 4000 Marine Generator engines are efficient and powerful, but nevertheless always satisfy the valid emission directives, whether on rails, in water, industrial applications or power generation. For this we rely on purely engine-internal measures, that we combine with after treatment technologies according to application and requirements.

The Oilfield Equipment related post MTU 12V 4000 Marine Generator Used [RM] is from Flowtech Energy. Looking for Oilfield Equipment including New, Used, Remanufactured and Surplus Oilfield Supply, check out our inventory or call our toll free number at 877-645-6693 for more information.

MTU 12V 4000 Marine Generator Used [RM] posted first on https://flowtechenergy.wordpress.com

MTU 16V 4000 Marine Generator Used [RM]

Equipment Name: MTU 16V 4000 Marine Generator (Used)
Engine Model: 16V 4000 M33F
Equipment Location: India
Manufacturer:  MTU
Year of Manufacture: 2015

MTU Energy diesel generator sets provide reliable solutions for your power generation needs. Featuring low fuel consumption, long service intervals and low emissions backed by more than 60 years of experience, our generator sets are designed to accomplish.

Marine Engines of MTU can configure the best possible complete propulsion system for your needs, implementing in your vessel as well MTU generator sets and MTU automation systems. From cost efficient standardized gensets to high end customized solutions. MTU 16V 4000 Marine Generator quality and reliability have been proven thousandfold all over the world. Local content requirements for all gensets can be fulfilled via global component sourcing and worldwide manufacturing possibilities. Our standard specification includes marine heat exchanger cooled MTU 16V 4000 Marine Generator engines with fully classifiable specification.

MTU 16V 4000 Marine Generator Options:

• Engine Series 4000
• Air- or water cooled alternator
• Engine and generator are close coupled together with flexible coupling and mounted on marine fail safe anti-vibration mountings to isolate the set form its combined welded steel base plate.
• MTU 16V 4000 Marine Generator designed base frame for rigid installation
• Factory approved resilient mounting for engine and alternator
• Factory approved torsional resilient coupling for flange mounted double bearing alternator
• Local operating panel (LOP genoline)
• Fuel pre filter with water separator
• Lube oil priming pump with control unit (PPC)
• Certification of all major classification societies
• Available as engine mounted heat exchanger with raw water pump or fresh water cooling system for ship side cooler
• Sea water cooling using engine mounted heat exchanger cooling equipment complete with fresh water make-up tank, thermostat, sea water pump and fresh water pump. Water cooled exhaust manifolds
• MTU standard fuel oil, lubricating oil and combustion air filters suitable for marine class.

MTU 16V 4000 Marine Generator – Diesel Engines

Marine Generator diesel engines perform reliably and efficiently as main or ancillary drive systems and provide energy as on-board power supply systems. Their performance, power and reliability has been proven time and time again. Longevity of Marine Generator is unmatched. Naturally, all MTU engines comply with the requirements of all relevant classification societies.

High performance with low weight
The engines of the Series 4000 are distinguished above all by their outstanding power to weight ratio and high power density. As a result they provide the necessary power reserves in order to drive heavy vehicles, boats or generators – without taking up a lot of unneeded installation space.

Emission optimized for every deployment location
MTU 16V 4000 Marine Generator engines are efficient and powerful, but nevertheless always satisfy the valid emission directives, whether on rails, in water, industrial applications or power generation. For this we rely on purely engine-internal measures, that we combine with after treatment technologies according to application and requirements.

The Oilfield Equipment related post MTU 16V 4000 Marine Generator Used [RM] is from Flowtech Energy. Looking for Oilfield Equipment including New, Used, Remanufactured and Surplus Oilfield Supply, check out our inventory or call our toll free number at 877-645-6693 for more information.

MTU 16V 4000 Marine Generator Used [RM] posted first on https://flowtechenergy.wordpress.com

Axon BOP 18-3/4 Used [AE]

Equipment Name: Axon BOP 18-3/4 (Used)
Equipment Location: India
Manufacturer: Axon

Axon BOP 18-3/4 Type 80 Control System

AXON’s TYPE 80 BOP Control Systems provide the reliability and control required for demanding offshore and land applications. The systems are available in standard or custom designs, with a choice of pumping systems. Axon BOP 18-3/4 type 80 systems feature ease of operation. TYPE  80 BOP control systems are the leading innovations in land and offshore drilling.

Axon BOP 18-3/4 is a large, specialized valve or similar mechanical device. It is used to seal, control and monitor oil and gas wells to prevent blowouts, the uncontrolled release of crude oil and/or natural gas from a well. They are usually installed in stacks of other valves.

Drilling industries are using this Blowout Preventer devices to seal off and control oil and gas wells. Blowout Preventer also called as BOP. These are designed to prevent “blowout” which is the unconstrained discharge of oil or gas from the well being drilled. Blowout Preventers are huge valves that withstand high pressure in order to safely, and often times remotely, restrain the uncontrolled release of liquids from the well during operation. Axon BOP 18-3/4 is usually installed in stacks and are the second line of defense to safeguard the well and employees.

Axon BOP 18-3/4 Benefits

• Modular design of control system utilizing choice of material: stainless steel, carbon steel
  with electroless nickel plating, corrosion resistant alloys and custom material
• System designed to operate in the event of the solenoid and pressure switch enclosures
  water ingress
• Superior filtration utilizing Absolute Micron filters
• Low power requirements: 300 watts per control pod
• Choice of pump systems & accumulators
• Pulse testing of systems during operations
• Lockable cylinder
• Dual load sharing power supplies
• Batch type mixing systems
• PBOF cabling system along with all connections with test ports
• Touchscreen controls, push-button control panels, division 1 panels, division 2 panels
• On-screen diagnostics
• Mini-pods for jack-up & surface BOP stacks using large bore BOPs with high volume

The Oilfield Equipment related post Axon BOP 18-3/4 Used [AE] is from Flowtech Energy. Looking for Oilfield Equipment including New, Used, Remanufactured and Surplus Oilfield Supply, check out our inventory or call our toll free number at 877-645-6693 for more information.

Axon BOP 18-3/4 Used [AE] posted first on https://flowtechenergy.wordpress.com

GE 752 Drilling Motor Rebuilt [AE]

Equipment Name: GE 752 Drilling Motor (Overhaul/Rebuilt)
Equipment Location: India

GE 752 Drilling Motor Information

Model Number: 5GE752R6A
Serial Number:  21080266
Rated HP: 1000HP
Rated Voltage: 750 V DC
Rated Current: 1185 Amps
RPM: 1040rpm

GE 752 Drilling Motor Performance

The performance characteristics of GE’s original Oil Drilling 752 DC drilling motor have been proven time and time again on all major drill rig operations. The motor performance on GE’s original 752 DC drilling motor is continually met or exceeded customer requirements. Standard Torque Horizontal DC Drilling Motor, single shaft, shunt wound, left hand leads facing non-drive end.

GE 752 Drilling Motor Operation

Thus, there are thousands of original GE 752 DC drilling motors are performing worldwide on all types of drill rigs, providing dependable operations of the rig’s primary equipment. The GE 752 DC drilling motor have been reported by rig operators to run for years without service or failure.

GE 752 Drilling Motor Advantages of Overhaul/Rebuilt Motor

• Rebuilding a damaged Motor may be a more economical option than full replacement.
• Lower price than a brand new motor
• Once the motor is rebuilt, you know everything has been closely inspected and it has many new parts. It will extend the length of life for the motor.

Motor & Engine Rebuilding Overhaul Process

Motor and Engine Assessment

• Dismantle motor & Inspect
• Steam Clean & Blast parts
• Inspect all Mechanical fits
• Rebuild Brush-holders

• Perform Surge Test
• Perform Ground Test to Armature & Field Coils
• Turn, Undercut and Balance Armature

Motor and Engine Assembly

• Final Assembly
• Install new Bearings
• Install new Brushes
• Install new Hardware
• Install new Seals

• Install new Gaskets
• No-Load Test
• Perform Final Test & Check Vibration
• Outfit & Paint

Every motor or engine is different and there may be different requirements.  For example, some motors may have a Full-Load test performed based on their specific application or request from customer.

The Oilfield Equipment related post GE 752 Drilling Motor Rebuilt [AE] is from Flowtech Energy. Looking for Oilfield Equipment including New, Used, Remanufactured and Surplus Oilfield Supply, check out our inventory or call our toll free number at 877-645-6693 for more information.

GE 752 Drilling Motor Rebuilt [AE] posted first on https://flowtechenergy.wordpress.com

Canrig Top Drive 1050E-712 Used [AE]

Equipment Name: Canrig Top Drive 1050E-712 (Used)
Equipment Location: India

Canrig Top Drive 1050E-712 Specification

Serial Number: 242
Load Capacity: 500 Tons
Output Power (Continuous): 1130HP
Maximum Continuous Torque: 42,700lbs.ft
Pressure Rating: 7,500 psi

Why Canrig Top Drive 1050E-712 is best?

Canrig Top Drive 1050E-712 is equipped with premium features that deliver both safety and reliability. These features make the Canrig top drive the only one of its kind in the industry and create a system that ensures maximum efficiency.

Canrig’s portfolio of top drive systems includes both hydraulic and electric-powered units, with the highest performance of torque and speed in the industry.

The durability of Canrig Top Drive 1050E-712 is second to none. All Canrig Top Drive unit comes with many different features to optimize drilling efficiency and safety. DC units the horsepower for each model increases as the hoisting capacity is increased.

Canrig Top Drive 1050E-712 reduce risk and increase safety while drilling in several ways. First, a top drive allows the driller to quickly engage and disengage pumps or the rotary while removing or restringing the pipe. Typically, the frequency of pipe getting stuck is significantly reduced when using top drives, thereby resulting in cost savings. Additionally, Canrig Top Drive 1050E-712 reduce much of the manual labor that was historically associated with drilling wells.

Canrig’s commitment to drilling automation and efficiency also resulted in the development of a line of intelligent top drive accessories. Each blends innovation with excellence in engineering.

Canrig Top Drive 1050E-712 Features/Benefits:

• DC Electric Drive Motor – Allows operator to select configuration best suited to the application.
• Disc Brake – Allows infinite positions for directional orientation.
• Integral Swivel – Eliminates fatigue failures associated with threaded connections.
• Hydraulic Torque Boost – Continuous rotation of up to 5 RPM, Precise directional control.

The Oilfield Equipment related post Canrig Top Drive 1050E-712 Used [AE] is from Flowtech Energy. Looking for Oilfield Equipment including New, Used, Remanufactured and Surplus Oilfield Supply, check out our inventory or call our toll free number at 877-645-6693 for more information.

Canrig Top Drive 1050E-712 Used [AE] posted first on https://flowtechenergy.wordpress.com

NOV 12-P-160 Triplex Mud Pump Used [AE]

Equipment Name: NOV 12-P-160 Triplex Mud Pump (Used)
Equipment Location: India

NOV A1700-PT Triplex Mud Pump Information:

• Manufacturer: NOV (National Oilwell Varco)
• Model Number: NOV 12-P-160
• Serial Number:
  Pump 1:10009531
  Pump 2:10009541
  Pump 3:11062-H

NOV 12-P-160 Triplex Mud Pump:

NOV 12-P-160 Mud Pump is rated at 1600 input horsepower (1193 kw) at 120 strokes per minute, with a 12-inch (304.8 mm) stroke. Multiple liner sizes allow pressures and volumes to handle circulation requirements in deep drilling applications.

NOV 12-P-160 Triplex Mud Pump Specification

Height, floor to center of front inlet suction, inches (mm): 16-1/2″ (419)
Height, floor to center of discharge, inches (mm): 45-1/4″ (1149)
Overall length over skids, inches (mm): 209″ (5309)
Width over frame, inches (mm): 78-5/8″ (1997)
Stroke, inches (mm): 12 (304.8)
Valve pot, API number: MOD.7
Width over pinion shaft, inches (mm): 113-3/4″ (2889)
Height, floor to top of gear case, inches (mm): 75″ (1905)
Height over fluid cylinders, inches (mm): 62-15/16″ (1599)
Max. input, horsepower (kW): 1600 (1193)
Rated pump speed, spm :120
Maximum fluid cylinder line bore*, inches (mm): 7-01/4″ (184.2)
Hydrostatic test pressure of standard fluid cylinders, psi (kg/cm²) :10,000 (703)
Ratio of gears: 3.439
Suction connection, ASA-150 lb. R.J. flange, inches: 10″
Discharge connection, cross w/API-5000 lb. R.J. flange, inches: 6″
Weight-complete, less sheave, lbs. (kg): 54,700 (24,810)
Above 5000 PSI on 12-P-160 is optional

NOV 12-P-160 Triplex Mud Pump Performance

An advanced fluid end design gives exceptionally smooth Triplex performance. This unique design facilitates fast inspection and easy servicing.

Flexibility: Compact engineering provides higher efficiency in less space. The NOV 12-P-160 Triplex Mud Pump light weight and flexible design make it easily adaptable to a variety of rig configurations. This provides flexibility as drilling requirements and conditions change.

Fluid End Modules: NOV offers a choice of fluid end modules and valve covers for every P Series pump model to select the fluid end module that exactly matches drilling requirements. All pump models can be equipped with either the standard or premium forged, two-piece interchangeable fluid modules

NOV 12-P-160 Triplex Mud Pump Features/Benefits

Power End:

• Fabricated steel frame construction
• Pressurized lubrication system standard on NOV 12-P-160 Triplex Mud Pump
• One-piece forged steel construction crankshaft, connecting rods and pinion shaft
• Adapability to a variety of drive arrangements on either side or both sides
• Premium roller bearings to enhance smooth performance and efficiency

Fluid End:

• Discharge piping connects from either side
• Two-piece modular cylinder design is completely interchangeable between modules
• Spray system cools and lubricates piston and liner surfaces
• Fast Change screw-type valve covers which facilitate quick removal and installation are standard
• Suction manifold can be equipped with front or side inlet connections
• Piston and liner chambers are easily accessible and fully open
• Two-piece piston rod construction allows removal of piston without disturbing liner
• Easy-to-operate clamps give positive locking for liners and piston rod assemblies

The Oilfield Equipment related post NOV 12-P-160 Triplex Mud Pump Used [AE] is from Flowtech Energy. Looking for Oilfield Equipment including New, Used, Remanufactured and Surplus Oilfield Supply, check out our inventory or call our toll free number at 877-645-6693 for more information.

NOV 12-P-160 Triplex Mud Pump Used [AE] posted first on https://flowtechenergy.wordpress.com

Nabors 2000HP Workover Rig 439E Used

Equipment Name: Nabors 2000HP Workover Rig 439E (Used)
Equipment Location: Alaska
Size: 2000HP
Manufacturer:  Nabors
Manufacture Date: 1986
Upgrades: 1990 to 2004

Nabors 2000HP Workover Rig 439E Description

Nabors is a leading provider of offshore platform workover and drilling rigs. Workover rigs, also called completion rigs or pulling units, Nabors 2000HP Workover Rig 439E specialized oil rigs set up for inserting or pulling pipe tubing in and out of wells. An operator uses workover crews when an oil well is being drilled, is undergoing repair or is being retired. These crews are relatively small compared to other rig crews and consist of tool pushers, operators or relief operators, derrick men and floormen or roughnecks.

A Work-over Rig is similar to a hoist or a telescoping tower secured with wires, that allows pipe and down-hole equipment to be run into and out of a well. Mostly truck-mounted mobile rigs, the onshore Nabors 2000HP Workover Rig 439E is very mobile. Thus it can be quickly moved between the fields. Onshore work-over rigs could be of various sizes and capacities and mainly referred to as light and heavy-duty. Service depth, work-over depth and load capacities are the key differentiation factors.

Nabors was also a pioneer in the platform workover rig market with its SunDowner and Super SunDowner series. These rigs can rig up, complete the assigned project, and rig down in a very short time-frame.

Nabors 2000HP Workover Rig 439E is used in the heaviest application. For example, they are used in complete well work-over operations, whereby a well is killed (production stopped) and tubing and completion equipment is removed. Workover Rigs are sometimes known by different name like completion wells or pulling units.

Nabors 2000HP Workover Rig 439E Advantages

• Safety
• Can do any well intervention job
• Might be more cost effective that snubbing unit, onshore

The Oilfield Equipment related post Nabors 2000HP Workover Rig 439E Used is from Flowtech Energy. Looking for Oilfield Equipment including New, Used, Remanufactured and Surplus Oilfield Supply, check out our inventory or call our toll free number at 877-645-6693 for more information.

Nabors 2000HP Workover Rig 439E Used posted first on https://flowtechenergy.wordpress.com

Cameron 13-5/8 10k Psi Double Ram BOP Used [AE]

Equipment Name: Cameron 13-5/8 10k Psi Double Ram (Used)
Equipment Location: India

Cameron 13-5/8 10k Psi Double Ram BOP Specification

Manufacturer: Cameron
Size: 13-5/8 inch
Working Pressure: 10,000 psi
API Specification: 16A

Blowout preventers (BOPs) are used to control blowout. The crew usually installs several blowout preventers (BOP stack) on top of the well, with an annular blowout preventer at the top and at least one pipe ram and one blind ram blowout preventer below. Therefore, some well control techniques require both the annular and the ram blowout preventers.

The Cameron U ram-type BOP is the most widely used ram-type BOP in the world. It also services the widest range of bore sizes of any of our ram-type BOPs.

Cameron 13-5/8 10k Psi Double Ram design is to maximize reliability and performance while simplifying maintenance. Hydraulic stud tensioning is available on larger sizes to ensure that stud loading is consistently accurate and even. Bonnet seal carriers eliminate the need for high makeup torque on bonnet studs and nuts. Wedge locks can be interlocked with the BOP operating system using sequence caps to ensure the wedge lock is retracted before applying pressure to open the Cameron 13-5/8 10k Psi Double Ram. Other features include hydraulically opening bonnets, a forged body, and a wide selection of rams to meet a variety of applications.

Ram blowout preventers are large steel rams, that have sealing elements. One type of ram blowout preventer is called a pipe ram because it closes on the drill pipe; it cannot seal on open hole. Blind ram blowout preventers are straight-edged rams used to close an open hole.

Cameron 13-5/8 10k Psi Double Ram BOP Features

• The rams in the U BOP are pressure-energized. Wellbore pressure acts on the rams to increase the sealing force and maintain the seal in case of hydraulic pressure loss.
• Seal integrity is actually improved by increased well bore pressure.
• Hydraulic stud tensioning available on larger sizes to ensure that stud loading is consistently accurate and even.
• Bonnet seal carrier is available to eliminate the need for high makeup torque on bonnet studs and nuts.
• Hydraulically operating locking mechanisms, wedgelocks, lock the ram hydraulically and hold the rams mechanically closed even when actuating pressure is released. The operating system can be interlocked using sequence caps to ensure that the wedgelock is retracted before pressure is applied to open the Cameron 13-5/8 10k Psi Double Ram.
• For subsea applications, a pressure balance chamber is used with the wedge locks to eliminate the possibility of the wedgelock becoming unlocked due to hydrostatic pressure.
• Other features include hydraulically opening bonnets, forged body and a wide selection of rams to meet all applications.

The Oilfield Equipment related post Cameron 13-5/8 10k Psi Double Ram BOP Used [AE] is from Flowtech Energy. Looking for Oilfield Equipment including New, Used, Remanufactured and Surplus Oilfield Supply, check out our inventory or call our toll free number at 877-645-6693 for more information.

Cameron 13-5/8 10k Psi Double Ram BOP Used [AE] posted first on https://flowtechenergy.wordpress.com

Shaffer Remote Drilling Choke Used [AE]

Equipment Name: Shaffer Remote Drilling Choke (Used)
Equipment Location: India

Shaffer Remote Drilling Choke Details

Size: 3 1/16
W.P: 10000
PN/SN: 706024/1

Shaffer Remote Drilling Choke Description

Fluids circulate from the well bore while holding any desired back pressure rating of the choke. The system includes one or two hydraulically operating chokes, pressure transmitters for drill pipe and annulus pressures, and a floor-mounted control panel. The Shaffer Remote Drilling Choke’s advanced technology meets the challenges of well pressure control, MPD and UBD drilling in challenging environmental conditions.

Shaffer Remote Drilling Choke Benefits

The Shaffer Remote Drilling Chokes design increases the oilfield operators service life and cost savings in high-pressure applications. Because of these high pressure applications, an operator uses these drilling chokes usually where substantial amounts of solids and abrasives are present. The Shaffer Drilling Choke System is compatible with any rig design. The choke system is compatible with control consoles, therefore operates with rig air or optional electric pump.

Most importantly, the conveniently arranged control console panel allows operation of one choke, or two chokes simultaneously. It also allows monitoring of well-killing data from any desired remote location. Finally, fluids can be circulated from the well bore while holding any desired back pressure within the pressure rating of the chokes.

The Oilfield Equipment related post Shaffer Remote Drilling Choke Used [AE] is from Flowtech Energy. Looking for Oilfield Equipment including New, Used, Remanufactured and Surplus Oilfield Supply, check out our inventory or call our toll free number at 877-645-6693 for more information.

Shaffer Remote Drilling Choke Used [AE] posted first on https://flowtechenergy.wordpress.com

NOV Hydra Rig 3 Piece Offshore Coiled Tubing Unit on Skid Used

NOV Hydra Rig 3 Piece Offshore Coiled Tubing Unit on Skid Used Information

Equipment Location: Alaska
Manufacturer: NOV
Size: Series 680 Injector Head
Manufacture Date: 2012
Upgrades: 2014

NOV Hydra Rig 3 Piece Offshore Coiled Tubing Unit on Skid Specification

• 05/2012 HR680 Injector and Skid Gooseneck
• 4.06 10K Dual Combi BOP with Skid Serial
• 4.06 10K Flow Cross
• Flanged 4.06 10K Riser (Footage TBD)
• 05/2012 Hydra Rig Series 3018 Reel Mounted on Skid
• Tool Box with Contents
• Flanged Adapters
• 1053 Hours

Hydra Rig skid mounted units come in a variety of configurations to meet the requirements of specific offshore operations. The standard NOV Hydra Rig 3 Piece Offshore Coiled Tubing Unit on Skid consists of a cabin, reel, injector, power pack, BOPs and transport skid for shipping the injector, BOPs, power hose reels and telescoping injector legs.

NOV Hydra Rig 3 Piece Offshore Coiled Tubing Unit on Skid Features

Control cabins range from small footprint steel-shell designs with a simple hose basket for storing all unit hose bundles, up through multi station and air purged insulated cabins. The coiled tubing unit comes with multiport hose reels mounted to the front of the cabin skid for interconnection to the reel, injector, powerpack and BOPs. NOV Hydra Rig 3 Piece Offshore Coiled Tubing Unit on Skid designs combine the cabin and powerpack on a single skid for fewer lifts from the work boat and a reduced footprint on deck. Reel size is limited only by the capacity of available platform cranes. NOV Hydra Rig 3 Piece Offshore Coiled Tubing Unit on Skid is best suited for Offshore drilling operation.

Hydra Rig is the world’s leading manufacturer of coiled tubing, nitrogen and snubbing equipment. With over 1,300 coiled tubing units, 1,500 nitrogen units and 200 snubbing units in use worldwide, our equipment meets the demand for rugged and dependable operations across all applications and environments.

Coiled Tubing Units Other Options

• Capillary/mini coil units
• Compact units
• Mast units
• Trailer mounted
• Truck mounted
• Ultra-High Capacity (UHC) CTU
• Wireless catenary unit

The Oilfield Equipment related post NOV Hydra Rig 3 Piece Offshore Coiled Tubing Unit on Skid Used is from Flowtech Energy. Looking for Oilfield Equipment including New, Used, Remanufactured and Surplus Oilfield Supply, check out our inventory or call our toll free number at 877-645-6693 for more information.

NOV Hydra Rig 3 Piece Offshore Coiled Tubing Unit on Skid Used posted first on https://flowtechenergy.wordpress.com

Aker Solution Hydraulic Roughneck 10-BC2510 Used [AE]

Equipment Name: Aker Solution Hydraulic Roughneck 10-BC2510 (Used)
Equipment Location: India

Aker Solution Hydraulic Roughneck 10-BC2510 Information:

Type: Maritime Hydraulics
Model: 10-BC2510
Year of Manufacturing: 2011
Serial No: 1857127

Aker Solution Hydraulic Roughneck 10-BC2510 Features:

Roughnecks are the product of a 30 year legacy of field experience combined with rigorous design and development. Featuring proven dependability and high performance, the Aker Solution Hydraulic Roughneck 10-BC2510 facilitate drilling operations by providing safe and reliable connections for drill pipes, drill collars, casings, cross-over subs and other bottom-hole assemblies.

Iron roughnecks automate pipe handling operations. They are used to clamp and exert torque on sections of drill pipe in order to complete make/break cycles during drilling operations.

From remote to locally controlled, our Aker Solution Hydraulic Roughneck 10-BC2510 allow maximum handling flexibility without jeopardizing safety factor during make-up and breakout operations.

The comprehensive Aker Solution Hydraulic Roughneck 10-BC2510 portfolio provides modularized solutions to meet the specific project requirements, for high-end land rigs, jackups, semi-submersibles or drillships, in the harshest environments, with torque capacities up to 300 000 Nm.

The iron roughnecks maximize pipe handling operations by providing integrated spinning and torque making capabilities into a single machine. By increasing crew and rig safety, reducing pipe handling.

Hydraulic roughneck models are designed for optimum performance, quality and reliability. Hydraulic roughnecks are also designed to spin in/make up and break out/spin out drill pipe and drill in a pre-defined sequence if equipped with automatic controls.

The Oilfield Equipment related post Aker Solution Hydraulic Roughneck 10-BC2510 Used [AE] is from Flowtech Energy. Looking for Oilfield Equipment including New, Used, Remanufactured and Surplus Oilfield Supply, check out our inventory or call our toll free number at 877-645-6693 for more information.

Aker Solution Hydraulic Roughneck 10-BC2510 Used [AE] posted first on https://flowtechenergy.wordpress.com

MHWirth DDM HY 650 Ton Top Drive Used [AE]

Equipment Name: MHWirth DDM HY 650 Ton Top Drive (Used) Equipment Location: India MHWirth DDM HY 650 Ton Top Drive Specification Model Number: MHWirthDDM 650 HY (or) DDM-650-HY Load Capacity: 650 Tons Max. Continuous Torque: 40,500 lbs-ft MHWirth DDM HY 650 Ton Top Drive Advantages Maritime Hydraulics DDM 650 HY 4 x Bosh Rexroth hydraulic motors; continuous drilling torque […]

The Oilfield Equipment related post MHWirth DDM HY 650 Ton Top Drive Used [AE] is from Flowtech Energy. Looking for Oilfield Equipment including New, Used, Remanufactured and Surplus Oilfield Supply, check out our inventory or call our toll free number at 877-645-6693 for more information.

Source: MHWirth DDM HY 650 Ton Top Drive Used [AE]

MHWirth DDM HY 650 Ton Top Drive Used [AE] posted first on https://flowtechenergy.wordpress.com

Newsletter

[newsletter_signup]Signup for the newsletter[newsletter_signup_form id=1][/newsletter_signup] [newsletter_confirm]Thanks for your interest![/newsletter_confirm] [newsletter_unsubscribe]Do you really want to unsubscribe?[/newsletter_unsubscribe]

The Oilfield Equipment related post Newsletter is from Flowtech Energy. Looking for Oilfield Equipment including New, Used, Remanufactured and Surplus Oilfield Supply, check out our inventory or call our toll free number at 877-645-6693 for more information.

Newsletter posted first on https://flowtechenergy.wordpress.com

Pumping Unit – Lufkin 228D-213-120 with Cement Pad H20

All of our pumping units come with a unique Pumping Unit Inspection Report that will give you insight into the operational capability of the pumping unit. Before asking for a pumping unit quote, please make sure to look over this inspection report to make sure it fits the needs of your oilfield project. If you are in need of additional equipment, please make sure to look at our inventory list or contact us for the most up-to-date list available.

Pumping Unit Information

MANUFACTURER: Lufkin

DESIGNATION: 228D-213-120

SIZE: M228D

STRUCTURE: 213

STROKE: 120

SPM: Unknown

CEMENT PAD: Yes

BASE LENGTH: Unknown

GEARBOX S/N: C87170K

ASSEMBLED/DISASSEMBLED: Disassembled

Pumping Unit General Information

HORSEHEAD: Good

WALKING BEAM: Good

EQUALIZER: Good

PITMAN ARMS: Good

CRANK ARMS: Good

T-BASE: N/A

UNIT ALIGNMENT: N/A

UNIT LEVEL: N/A

BELTS: N/A

JACKSHAFT: N/A

BELT GUARD: Fair

FENCE: Complete

UNIT BALANCE: N/A

WEIGHTS: 4

Pumping Unit Brake System

ROD OR CABLE: N/A

ROD/CABLE CONDITION: Fair

BRAKE SHOES: External

SHOE CONDITION: Unknown/Not Inspected

BRAKE DRUM: Unknown/Not Inspected

BRAKE HANDLE: Fair

BRAKE CABLE: Fair

CARRIER BAR: Unknown/Not Inspected

SHAFT SIZE: Unknown

GATE: N/A

ROD ROTATOR: N/A

Pumping Unit Gear Box

RATIO: 28.4 to 1

REDUCER SHEAVE: Unknown

OIL CAPACITY: Unkown

HIGH SPEED PINION: Light Signs Of Wear

LOW SPEED PINION: Light Signs Of Wear

HIGH SPEED GEAR: Light Signs Of Wear

LOW SPEED GEAR: Light Signs Of Wear

WIPERS: Unknown

HIGH SPEED SEALS: Seeping

GEARBOX SPLIT: Not Seeping

DRAIN VALVE CONDITION: Good

DRAIN VALVE FUNCTION: Seeping

Pumping Unit Bearing Assembly

WRISTPIN SEALS: Good, Seeping

WRISTPIN BEARINGS: Good, Seeping

SADDLE SEALS: Fair, Seeping

SAMPSON POST SEALS: Fair, Seeping

SAMPSON POST BEARINGS: Fair, Seeping

TAIL SEALS: Fair, Seeping

SADDLE BEARINGS: Fair, Seeping

TAIL BEARINGS: Fair, Seeping

COMMENTS for 228D Lufkin – (H20): Unit disassembled at time of inspection.

The Oilfield Equipment related post Pumping Unit – Lufkin 228D-213-120 with Cement Pad H20 is from Flowtech Energy. Looking for Oilfield Equipment including New, Used, Remanufactured and Surplus Oilfield Supply, check out our inventory or call our toll free number at 877-645-6693 for more information.

Pumping Unit – Lufkin 228D-213-120 with Cement Pad H20 posted first on https://flowtechenergy.wordpress.com

Pumping Unit – National 160 with Cement Pad H9

All of our pumping units come with a unique Pumping Unit Inspection Report that will give you insight into the operational capability of the pumping unit. Before asking for a pumping unit quote, please make sure to look over this inspection report to make sure it fits the needs of your oilfield project. If you are in need of additional equipment, please make sure to look at our inventory list or contact us for the most up-to-date list available.

Pumping Unit Information

MANUFACTURER: National

DESIGNATION: Unknown

SIZE: 160

STRUCTURE: 00

STROKE: 64

SPM: Unknown

CEMENT PAD: Yes

BASE LENGTH: 20′

GEARBOX S/N: 6101

ASSEMBLED/DISASSEMBLED: Disassembled

Pumping Unit General Information

HORSEHEAD: Good

WALKING BEAM: Good

EQUALIZER: Good

PITMAN ARMS: Good

CRANK ARMS: Good

T-BASE: N/A

UNIT ALIGNMENT: N/A

UNIT LEVEL: N/A

BELTS: Unknown

JACKSHAFT: N/A

BELT GUARD: Very Good

FENCE: N/A

UNIT BALANCE: N/A

WEIGHTS: 3

Pumping Unit Brake System

ROD OR CABLE: Cable

ROD/CABLE CONDITION: Fair

BRAKE SHOES: Internal

SHOE CONDITION: Unknown/Not Inspected

BRAKE DRUM: Unknown/Not Inspected

BRAKE HANDLE: Fair

BRAKE CABLE: N/A

CARRIER BAR: Unknown/Not Inspected

SHAFT SIZE: Unknown

GATE: N/A

ROD ROTATOR: N/A

Pumping Unit Gear Box

RATIO: 31.9 to 1

REDUCER SHEAVE: 6

OIL CAPACITY: Unknown

HIGH SPEED PINION: No Signs Of Wear

LOW SPEED PINION: No Signs Of Wear

HIGH SPEED GEAR: No Signs Of Wear

LOW SPEED GEAR: No Signs Of Wear

WIPERS: Unknown

HIGH SPEED SEALS: Not Seeping

GEARBOX SPLIT: Unknown

DRAIN VALVE CONDITION: Good

DRAIN VALVE FUNCTION: Seeping

Pumping Unit Bearing Assembly

WRISTPIN SEALS: Fair,Seeping

WRISTPIN BEARINGS: Fair,Seeping

SADDLE SEALS: Fair,Seeping

SAMPSON POST SEALS: N/A,N/A

SAMPSON POST BEARINGS: N/A,N/A

TAIL SEALS: Fair,Seeping

SADDLE BEARINGS: Fair,Not Seeping

TAIL BEARINGS: Fair,Seeping

COMMENTS for 160 National (H9) – Damage: EH-21SB-160DW – The item could not be operationally checked. Unit disassembled at time of inspection. Unit has cracked/missing weight.

The Oilfield Equipment related post Pumping Unit – National 160 with Cement Pad H9 is from Flowtech Energy. Looking for Oilfield Equipment including New, Used, Remanufactured and Surplus Oilfield Supply – , check out our inventory or call our toll free number for more information.

Pumping Unit – National 160 with Cement Pad H9 posted first on https://flowtechenergy.wordpress.com

Pumping Unit – Lufkin M-160D with Cement Pad H4

All of our pumping units come with a unique Pumping Unit Inspection Report that will give you insight into the operational capability of the pumping unit. Before asking for a pumping unit quote, please make sure to look over this inspection report to make sure it fits the needs of your oilfield project. If you are in need of additional equipment, please make sure to look at our inventory list or contact us for the most up-to-date list available.

Pumping Unit Information

MANUFACTURER: Lufkin

DESIGNATION: Unknown

SIZE: M-160D

STRUCTURE: 200

STROKE: 86

SPM: Unknown

CEMENT PAD: Yes

BASE LENGTH: Unknown

GEARBOX S/N: B263650

ASSEMBLED/DISASSEMBLED: Assembled

Pumping Unit General Information

HORSEHEAD: Good

WALKING BEAM: Good

EQUALIZER: Good

PITMAN ARMS: Good

CRANK ARMS: Good

T-BASE: N/A

UNIT ALIGNMENT: N/A

UNIT LEVEL: N/A

BELTS: Unknown

JACKSHAFT: N/A

BELT GUARD: Fair

FENCE: Complete

UNIT BALANCE: N/A

WEIGHTS: 4

Pumping Unit Brake System

ROD OR CABLE: Cable

ROD/CABLE CONDITION: Fair

BRAKE SHOES: External

SHOE CONDITION: Good

BRAKE DRUM: Good

BRAKE HANDLE: Good

BRAKE CABLE: Fair

CARRIER BAR: Unknown/Not Inspected

SHAFT SIZE: Unknown

GATE: Unknown

ROD ROTATOR: Unknown

Pumping Unit Gear Box

RATIO: 28.6 to 1

REDUCER SHEAVE: 9

OIL CAPACITY: Unknown

HIGH SPEED PINION: Light Signs Of Wear

LOW SPEED PINION: Light Signs Of Wear

HIGH SPEED GEAR: Light Signs Of Wear

LOW SPEED GEAR: Light Signs Of Wear

WIPERS: Unknown/Not Inspected

HIGH SPEED SEALS: Seeping

GEARBOX SPLIT: Unknown

DRAIN VALVE CONDITION: Fair

DRAIN VALVE FUNCTION: Not Seeping

Pumping Unit Bearing Assembly

WRISTPIN SEALS: Fair,Seeping

WRISTPIN BEARINGS: Fair,Seeping

SADDLE SEALS: Fair,Seeping

SAMPSON POST SEALS: N/A,N/A

SAMPSON POST BEARINGS: N/A,N/A

TAIL SEALS: Fair,Seeping

SADDLE BEARINGS: Fair,Seeping

TAIL BEARINGS: Fair,Seeping

COMMENTS for 160 Lufkin (H4): Unit had small crack near base but appears fixed.

The Oilfield Equipment related post Pumping Unit – Lufkin M-160D with Cement Pad H4 is from Flowtech Energy. Looking for Oilfield Equipment including New, Used, Remanufactured and Surplus Oilfield Supply – , check out our inventory or call our toll free number for more information.

Pumping Unit – Lufkin M-160D with Cement Pad H4 posted first on https://flowtechenergy.wordpress.com